清原 修次　博士の研究業績


4. 国際会議

  1. I. Miyamoto and S. Kiyohara: Focused Ion Beam of Diamond and a Diamond Probe, Proc. of 3rd International Conference on Nanotechnology, (1992) pp.24-25. (Science University of Tokyo, Chiba, Japan, 18 September 1992)
  2. I. Miyamoto and S. Kiyohara: Oxygen Ion Beam Etching of Diamond (100), Proc. of 1993 ASPE Annual Meeting, (1993) pp.301-304. (American Society for Precision Engineering, Westin Hotel, Seattle, USA, 9 November 1993)
  3. S. Kiyohara and I. Miyamoto: Ultra-precision Processing of Diamond with Oxygen Ion Beams, 7th International Conference on Production/Precision Engineering, 4th International Conference on High Technology, JSPE Publication Series No.1, Advancement of Intelligent Production (1994) pp.576-581. (Japanese Society for Precision Engineering, Nippon Convention Center (Makuhari Messe), Chiba, Japan, 16 September 1994)
  4. S. kiyohara, I. Miyamoto, H. Morita, Y. Taguchi and M. Yoshida: Machining Characteristics of Diamond Chips Processed with Oxygen Ion Beams Using an ECR Type Apparatus, Proc. of 4th International Conference on Nanotechnology, (1994) 4 pages of all. (University of Warwick, Coventry, UK, 22 September 1994)
  5. I. Miyamoto, S.Kiyohara and M. Ide: Focused Ion Beam Machining of Diamond Probe -Simulation for Profile Change of Probe-, Proc. of 1994 ASPE Annual Meeting,(1994) pp.436-439. (American Society for Precision Engineering, Hyatt Regency Chincinnati, Ohio, USA, 5 October 1994)
  6. S. Kiyohara and I. Miyamoto: Hydrogen Ion Beam Processing of Single Crystal Diamond Chips, 1994 MRS Fall Meeting, Mat. Res. Soc. Symp. Proc. Vol.354 (1995) pp.717-722. (Materials Research Society, Boston Marriott Hotel, Boston, Massachusetts, USA, 1 December 1994)
  7. S.kiyohara, I. Miyamoto, K. Kitazawa and S. Honda: Ion Beam Assisted Chemical Etching of Single Crystal Diamond Chips, Joint International Symposium of the '96 MRS-J Conference (Symposium N) and the 3rd Ion Engineering Conference, Nucl. Inst. and Meth. in Phys. Rese.B, Vol.121, No.1-4 (1997) pp.510-513. (Materials Research Society of Japan, Nippon Convention Center (Makuhari Messe), Chiba, Japan, 24 May 1996)
  8. S. Kiyahora, I. Miyamoto, T. Masaki and S. Honda: Ion Beam Somoothing of CVD Diamond Thin Films by Etchback Method, Joint International Symposium of the '96 MRS-J Conference (Symposium N) and the 3rd Ion Engineering Conference, Nucl. Inst. and Meth. in Phys. Rese.B, Vol.121, No.1-4 (1997) pp.191-194. (Materials Research Society of Japan, Nippon Convention Center (Makuhari Messe), Chiba, Japan, 24 May 1996)
  9. S. kiyohara, I. Miyamoto, Y. Yagi and K. Mori: Ion Beam Induced Etching of Diamond Chips in Oxygen Atomosphere, Proc. of 5th International Conference on Nanotechnology, (1997) pp.59-60. (Science University of Tokyo, Chiba, Japan, 5 September 1997)
  10. S. Kiyohara, I. Miyamoto, Y. Yagi and K. Mori: Radical Oxygen Beam Machining of Single Crystal Diamond Chips, ICPE'97 International Conference on Precision Engineering (3rd ICMT), Proceesings of the International Conference on Precision Engineering, Vol.2 (1997) pp.637-641. (The Grand Hotel Taipei, Taipei, Taiwan, R.O.C., 21 November 1997)
  11. S. Kiyohara, T. Abe, K. Ayano, Y. Yagi and K. Mori: ECR-Oxygen Plasma Machining of CVD Diamond Films, 1st international conference and general meeting of the european society for precision engineering and nanotechnology, conference Proceedings Vol.2 (1999) pp.60-63. (Congress Centre Bremen, Bremen, Germany, 2 May 1999)
  12. S. Kiyohara, K. Ayano, T. Abe and K. Mori: Micropatterning of CVD Diamond Films in Electron Beam Lithography, 3rd International Symposium on Surface Science for Micro- and Nano-Device Fbrication, ABSTRACT (1999) 161. (International Conference Center, Waseda University, Tokyo, Japan, November 30 1999)
  13. S. Kiyohara, K. Osada, H. Ueda and K. Mori: Microfabrication of diamond Films by Localized Electron Beam Chemical-Vapor-Deposition, Proc. of the 6th Joint Warwick/Tokyo Nanotechnology Symposium and euspen Workshop, (2000) (University of Warwick, Coventry, UK, 19 September 2000)
  14. K. Ayano, S. Kiyohara, J. Obane, M. Yatabe and K. Mori: Nagative Biased Etching of Polished CVD Diamond Films with ECR Oxygen and Hydrogen Plasmas, Proc. of the 6th Joint Warwick/Tokyo Nanotechnology Symposium and euspen Workshop, (2000) (University of Warwick, Coventry, UK, 21 September 2000)
  15. S. Kiyohara, J. Taniguchi, I. Miyamoto, K. Ayano and K. Mori: Micro-line Patterning of Polycrystalline and Single-crystal Diamonds using Metal Napthenates in Electron Beam Lithography, Proc. of the 6th Joint Warwick/Tokyo Nanotechnology Symposium and euspen Workshop, (2000) (University of Warwick, Coventry, UK, 21 September 2000)
  16. S. Kiyohara and K. Mori: Fabrication of Diamond Micropatterns by ECR Oxygen Plasma with a Metal Napthenate Mask, Proceedings of the 6th Applied Diamond Conference/2nd Frontier Carbon Technology Joint Confernce, (2001) pp.317-322. (Auburn University Hotel and Conference Center, Alabama, USA, 6 August 2001)
  17. S. Kiyohara and K. Mori: Effect of fluorocarbon addition to an oxygen gas in electron cyclotron resonance plasma etching of diamond films, Proceedings of the 3rd International Conference and 4th General Meeting of euspen and nanotechnology, Vol.1 (2002) pp.233-236. (Eindhoven University of Technology, Eindhoven, The Netherlands, 28 May 2002)
  18. S. Kiyohara and K. Mori: Micropatterning of diamond films with composite oxide mask of metal octylates in electron beam lithography, Proceedings of the 3rd International Conference and 4th General Meeting of euspen and nanotechnology, Vol.2 (2002) pp.427-430. (Eindhoven University of Technology, Eindhoven, The Netherlands, 28 May 2002)
  19. S. Kiyohara, T. Motoishi and K. Mori: Nanopatterning of Chemical Vapor Deposited Diamond Films in Room Temperature Nanoimprint Lithography Using Diamond Molds, 2003 Materials Research Society Fall Meeting, Mat. Res. Soc. Symp. Proc. Vol.EXS-2 (2003) pp.73-75 . (Hynes Covention Center and Sheraton Boston Hotel, Boston, Massachusetts, USA, 2 December 2003)
  20. S. Kiyohara, F. Matsubayashi, M. Fujiwara and K. Mori: Nanopatterning of Diamond Films in Diamond Mold Room Temperature Nanoimprint Lithography Using Polysiloxane, Proc. of the 5th International Conference of the european society for precision engineering and nanotechnology, Vol.1, pp.89-92. (Le Corum, Montpellier, France, 10 May 2005)
  21. S. Kiyohara, M. Fujiwara, F. Matsubayashi and K. Mori: Fabrication of Micro Organic Light-Emitting Devices in Nanoimprint Method Using Diamond Molds, Proc. of the 5th International Conference of the european society for precision engineering and nanotechnology, Vol.2, pp.751-754. (Le Corum, Montpellier, France, 10 May 2005)
  22. S. Kiyohara, T. Kashiwagi, H. Takikawa, Y. Kurashima, Y. Taguchi and Y. Sugiyama: Nanofabrication of Three-Dimensional Imprint Diamond Molds by ECR Oxygen Ion Beams using Polysiloxane, 5th International Symposium on Surface Science and Nanotechnology, Abstracts (2008) 505. (International Conference Center, Waseda University, Tokyo, Japan, 12 November 2008)
  23. S. Kiyohara, S. Araki, Ｙ. Taguchi, Y. Sugiyama and Y. Omata, Y. Kurashima, H. Takikawa: Diamond Nano-dot arrays fabricated by Room-temperature Curing Nanoimprint Lithography using Glass-like Carbon Molds, 17th Asian Symposium on Ecotechnology (ASET17) Book of Abstracts (2010) p.108. (Unazuki International Hall "Selene", Kurobe, Japan, 12 November 2010)
  24. S. Kiyohara, M. Kumagai, Y. Taguchi, Y. Sugiyama, Y. Omata, Y. Kurashima H. Takikawa: Diamond Nanodot Arrays Fabricated by Room-Temperature Curing Nanoimprinting using Diamond Molds, 2010 Materials Research Society Fall Meeting ABSTRACTS (2010) p.A5-2. (Hynes Covention Center and Sheraton Boston Hotel, Boston, Massachusetts, USA, 29 November 2010)
  25. T. Kashiwagi, H. Okuda, H. Tanoue, Y. Suda, H. Takikawa, M. Kamiya, S. Kiyohara, T. Kawashima, T. Shibata, Y. Taguchi, Y. Sugiyama, Y. Omata, M. Taki, Y. Hasegawa, N. Tsuji and T. Ishikawa: Patterning of Tetrahedral Amorphous Carbon Film by Electron Beam Lithography, The Asia-Pacific Interdisciplinary Research Conference 2011, 18PP-70, p.172 (Toyohashi University of Technology,Toyohashi, Aichi, Japan, 18 November 2011)
  26. S. Kiyohara, C. Ito, I. Ishikawa, H. Takikawa, Y. Taguchi, Y. Sugiyama, Y. Omata and Y. Kurashima: Fabrication of Diamond Nanopit Arrays by Room-temperature Curing Nanoimprint Lithography Using Glass-like Carbon Molds, 2011 Materials Research Society Fall Meeting ABSTRACTS (2011) p.N12-2. (Hynes Covention Center and Sheraton Boston Hotel, Boston, Massachusetts, USA, 30 November 2011)
  27. I. Ishikawa, T. Okuno, S. Kiyohara, Y. Taguchi, Y. Sugiyama, Y. Omata and Y. Kurashima: Micro-Organic Light-Emitting Devices Fabricated by Room-Temperature Curing Nanoimprint Lithography Using Diamond Molds, 2011 Materials Research Society Fall Meeting ABSTRACTS (2011) p.N12-4. (Hynes Covention Center and Sheraton Boston Hotel, Boston, Massachusetts, USA, 30 November 2011)
  28. H. Tanoue, T. Kashiwagi, H. Okuda, Y. Suda, H. Takikawa, M. Kamiya, S. Kiyohara, T. Kawashima, T. Shibata, Y. Taguchi, Y. Sugiyama, Y. Omata, M. Taki, Y. Hasegawa, N. Tsuji and T. Ishikawa: Patterning of Tetrahedral Amorphous-Carbon Film by Electron Beam Lithography and Pick Up from Si-Wafer in Focused Ion Beam System, 4th International Symposium on Advanced Plasma Science and its Applications for Nitrides and Nanomaterials, 5p-C02OC, (Chubu University, Aichi, Japan, 2012.03.4-8)
  29. S. Kiyohara, T. Ikegaki,　I. Ishikawa,　H. Tanoue,　H. Takikawa,　Y. Taguchi,　Y. Sugiyama,　Y. Omata,　Y. Kurashima: Fabrication of DLC-based Micro-gears by Room-temperature Curing Nanoimprint Lithography Using Glass-like Carbon Molds, 2012 Materials Research Society Fall Meeting ABSTRACTS (2012) p.EE5-1. (Hynes Covention Center and Sheraton Boston Hotel, Boston, Massachusetts, USA, 26 November 2012)
  30. S. Kiyohara, S. Matta, I. Ishikawa, H. Tanoue,　H. Takikawa, Y. Taguchi, Y. Sugiyama, Y. Omata, Y. Kurashima: Nanofabrication of DLC-dot Arrays by Room-temperature Curing Imprint-liftoff Method, 2012 Materials Research Society Fall Meeting ABSTRACTS (2012) p.EE5-2. (Hynes Covention Center and Sheraton Boston Hotel, Boston, Massachusetts, USA, 26 November 2012)
  31. I. Ishikawa, K. Sakurai, S. Kiyohara, C. Ito,　H. Tanoue, Y. Suda, H. Takikawa, Y. Taguchi, Y. Sugiyama, Y. Omata, Y. Kurashima: Fabrication of Micro-OLEDs by Room-temperature Curing Contact-imprint Using DLC Molds, 2012 Materials Research Society Fall Meeting ABSTRACTS (2012) p.EE5-3. (Hynes Covention Center and Sheraton Boston Hotel, Boston, Massachusetts, USA, 26 November 2012)
  32. Kensuke Tsuji, Ippei Ishikawa and Shuji Kiyohara: Approach toeducational method for radiation measurements using plastics, Abstracts of The 7th International Symposium on Advances in Technology Education, p.85 (Nara Prefectural New Public Hall, Japan, 26 September 2013).
  33. Ippei Ishikawa, Takuya Matsumoto and Shuji Kiyohara: Enhanced Power Efficiency of Inverted Organic Light Emitting Diode using Photoconductive Layer, The 5th International Symposium on Organic andInorganic Electronic Materials and Related Nanotechnologies, p.60 (Niigata, Japan June 2015)
  34. Shuji Kiyohara, Ippei. Ishikawa, Yuto Shimizu, Shogo Yoshida, Toru Harigai, Hirofumi Takikawa, Masahiko Watanabe, Yoshinari Sugiyama, Yukiko Omata and Yuichi Kurashima: FABRICATION OF DIAMOND-LIKE CARBON-BASED MICRO/NANO DEVICE USING ROOM-TEMPERATURE NANOIMPRINT BY INDUSTRY-UNIVERSITY COLLABORATIVE RESEARCH, The 9th International Symposium on Advances in Technology Education, pp.548-551. (Hotel New Otani Nagaoka, Japan, 16-17 September 2015)
  35. S. Kiyohara, S. Yoshida,　I. Ishikawa,　T. Harigai,　H. Takikawa,　M. Watanabe,　Y. Sugiyama,　Y. Omata,　Y. Kurashima: Fabrication of Diamond-Like Carbon Emitter Patterns by Room-Temperature Curing Nanoimprint Lithography With PDMS Molds Using Polysiloxane, 2015 Materials Research Society Fall Meeting and Exhibit ABSTRACTS (2015) p.DD5-06. (Hynes Covention Center and Sheraton Boston Hotel, Boston, Massachusetts, USA, 30 November 2015)
  36. S. Kiyohara, Y. Shimizu,　I. Ishikawa,　T. Harigai,　H. Takikawa,　M. Watanabe,　Y. Sugiyama,　Y. Omata,　Y. Kurashima: Fabrication of Diamond-Like Carbon Microgears by Room-Temperature Curing Nanoimprint Lithography Using Ladder-Type Hydrogen Silsesquioxane, 2015 Materials Research Society Fall Meeting and Exhibit ABSTRACTS (2015) p.DD5-09. (Hynes Covention Center and Sheraton Boston Hotel, Boston, Massachusetts, USA, 30 November 2015)
  37. >Yushi Iijima, Toru Harigai, Ryo Isono, Takahiro Imai, Yoshiyuki Suda, Hirofumi Takikawa, Masao Kamiya, Makoto Taki, Yushi Hasegawa, Nobuhiro Tsuji, Satoru Kaneko, Shinsuke Kunitsugu, Hitoe Habuch, Shuji Kiyohara, Mikio Ito, Sam Yick, Avi Bendavid, and Phil Martin: Fabrication of Nitrogen-Containing DLC Film by Filtered Arc Deposition as Conductive Hard-Coating Film, ISPlasma2017/IC-PLANTS2017 (Chubu University, Aichi, Japan, 2 March 2017)
  38. Atsushi Kimoto, Ippei Ishikawa and Shuji Kiyohara : Verification of Experimental Time Reduction by Improving Etchant of PADC, The 1st KOSEN International Research Symposium, No.17, (2023) (Hitotsubashi Hall, Japan, 1 March 2023)
- - - - - - - - - - - - - - - -

1. 研究論文（査読付）

2. 研究論文（査読なし）

3. 解説論文

4. 国際会議

5. 研究発表

6. 著書
■自己紹介
■研究分野

清原研究室のホームページへ